Landlords to fit smoke & carbon monoxide (CO) alarms

The Government has announced that it is intended that landlords will be required to install working smoke alarms and where gas appliances are fitted, carbon monoxide (CO) alarms as well, in their properties.  This is in a bid to raise safety and reduce the number of deaths from CO incidents in the rental sector.

The move is expected to prevent some 26 fatalities and 670 injuries per year, and is part of wider Government actions being undertaken to ensure there are sufficient measures in place to protect public safety.

These measures are expected to become effective from October 2015 subject to Parliamentary approval.  Consultation has shown that this will be strongly supported.  It has been suggested that England’s 46 fire and rescue authorities will provide support to private landlords within their areas by providing free alarms using grant funding from the government.

Fire AlarmThe proposed changes to the law would require landlords to install smoke alarms on every floor of their property, and test them at the start of every tenancy agreement.

These should be fitted to the ceiling, especially close to areas of high risk (kitchens for example) and outside bedrooms.

 

CO AlarmLandlords would also need to install carbon monoxide alarms in high risk rooms – such as those where a solid fuel heating system is installed.  Although gas and oil may not be considered as solid fuel, CO alarms should also be fitted.  In the rooms where these appliances are installed at a horizontal distance of between 1m and 3m from the source.  If only one alarm is fitted it is best fitted relatively close to the breathing zone of the occupants.

Failure to comply could see landlords face up to a £5,000 penalty.

Brandon Lewis, Housing Minister, said “The vast majority of landlords offer a good service and have installed smoke alarms in their homes, but I’m changing the law to ensure every tenant can be given this important protection.”  “But with working smoke alarms providing the vital seconds needed to escape a fire, I urge all tenants to make sure they regularly test their alarms to ensure they work when it counts.  Testing regularly remains the tenant’s responsibility”

Stephen Williams, Communities Minister, said “We’re determined to create a bigger, better and safer private rented sector – a key part of that is to ensure the safety of tenants with fire prevention and carbon monoxide warning.”  “People are at least 4 times more likely to die in a fire in the home if there’s no working smoke alarm.”

Steve Martin, Head of the Fire and Security Association, said: “This announcement will help improve the safety of rented accommodation and punish those landlords who are putting the safety of their tenants at risk for the sake of saving a relatively small sum of money.  Now private rented properties will be brought into line with the existing building regulations that require newly-built homes to have hard-wired smoke alarms installed.”

Are you using a competent Gas Safe company?

Gas is fundamentally unsafe yet used all over the UK in both domestic and commercial premises, but over the past 26 years the Regulations, Registers and best practices have improved, reducing the number of gas related incidents and more particularly the number of fatalities has fallen dramatically.

gas safeIn an effort to make gas safe the Gas Safe Register was created, it is not a voluntary register – all gas engineers have to be registered! CHECK the register for your Gas Engineer – it could be a life you save! www.gassaferegister.co.uk and click on the yellow text to check either a Business or an Engineer.

All of DMG Delta’s Gas engineers are Gas Safe registered, in various skill bases to ensure we have the skills to match our Client’s expectations and needs.  As a company we are registered with Gas Safe (registered number is 23956), which means that our management system is annually audited by Gas Safe.  We have passed this year with no non-conformities or recommendations identified, although we have made improvements to the system as part of our continuous improvement programme.

Using a Gas Safe registered contractor for your gas appliances and plant rooms not only ensures that you are compliant with the regulations, but also that the work undertaken will be completed by a very competent person who has undergone formal training in specific skill sets, leaving your premises safe and your equipment functioning longer due to excellent maintenance.

With over 30 years’ experience as heating engineers in both the domestic and commercial environment, DMG Delta Ltd is a company that really beats your expectations when it comes to plant room and domestic servicing, as well as installation work in the London area.  We work actively with you to make sure that your gas installations are and remain compliant and safe.

Keeping residents warm this winter

warm_eco_friendly_house_800x600

With colder weather setting in and the chance of freezing temperatures this winter, one thing every Managing Agent needs to get right is heating. The demand on boiler plant and district heating rises as outside temperatures drop. Small faults can become big problems and older plant can struggle to cope. Yet residents in apartment blocks need reliable heating and hot water. So how can expectations be achieved?

The most important step is to put in place a regular maintenance schedule, tailored to the building. This planned maintenance helps prevent problems arising and prolong the life of assets such as boiler plant. By identifying and resolving issues before they happen, fewer call-outs are required which in turn cuts down costs, reducing residents’ bills.

Much of the older blocks have their original distribution systems. These are infrastructure items that need careful monitoring but are often forgotten.

Companies like DMG Delta, which specialise in block maintenance, work 24/7 to ensure that there are no surprises when it comes to winter heating. When problems are identified the company’s engineers are fully qualified and equipped to fix them first time in the majority of cases. This saves Managing Agents the time, hassle and cost of second and third visits.

As well as ensuring effective heating, buildings must comply with increasingly complex regulations. It’s critical that sites are serviced by fully compliant gas engineers, authorised to complete the necessary checks and issue the all important paperwork that shows that Managing Agents have met their legal obligations. With this kind of back-up, you have the reassurance that your engineers will know the latest rules, no matter how often they change. Engineers at DMG Delta are qualified to provide this service. Employees, quality and health & safety are fundamental so that the service residents and Managing Agents experience is what they’d expect and more.

Whilst technical excellence is a vital aspect of a high-performing maintenance service, of equal importance is the provision of a friendly help desk. Does your help desk really know you and your building and provide a maintenance service that exactly matches your needs?

Even with the best preventative work, problems can arise with heating and boiler plant. We advocate that 24 hour emergency support is a feature of all maintenance contracts. For our clients, an engineer is generally on site within a 2-hour time frame. This is a rapid response because when it comes to heating, we believe Managing Agents and their residents shouldn’t have to wait a moment longer. But not every maintenance company can react as quickly. So check your maintenance company’s approach and key performance indicators to see if they can get close to matching up.

Electricity - Friend or Foe?

In today’s age everyone has a house full of electrical gadgets, equipment and tools. We might hear folk moaning about the gadgets, especially when they plug2 stop working, but all in all we really are reliant on electricity – life without it would be hard!

There is no doubt that in the home electrical faults are the top cause of fires, which is the opposite of fires at work (this is because at work equipment and circuits get tested – at home they generally are not).

During 2011/12 there were 37,601 accidental fires of electrical origin and 244 deaths! Of this 11,954 were cooking appliances, 2,899 electrical supply, 1,083 washing machines and tumble driers, 767 lighting and 475 dishwashers!

What is not available is the number of fires caused by chargers overheating, there is certainly records of these being the cause of some fires.

I hope we all know the dangers of electricity and no-one has any of these culprits in their home – if you have then get rid today!

Faulty PlugEven extension boards are unsafe – quote I heard the other day – they are supposed to be a temporary solution not a permanent one! If you are going to have an extension board in situ for a length of time then make sure it is fused, and perhaps even surge protected into an RCD socket.

If you find a fault at home, but more especially at work then unless you are employed as a qualified electrician then you must not attempt to repair it! Either call an electrician or take it to the dump.

If you do see someone experiencing an electrical shock then you need to know what to do. The electricity will have found a route through the body to ground – don’t add yourself into this circuit!

DO NOT touch the person until you are sure the electricity is off, otherwise there will be two casualties.

Use something that is not conductive (a wooden broom would be good), to move the electrical items away from the person.

If they are conscious take them to hospital (even when they say they don’t need to), as electricity will track through the body until it finds ground. This could mean going through the heart – there may not be any pain or other symptoms but the organs could still be burnt.

If they are not conscious call 999 or 112 as this will be an emergency!

Overloaded Plug

Home safety is as important as office safety! 
Don’t get paranoid about electricity,
But do make sure you have control measures in place,
And know what to do to make your family safe!

DMG Delta - Site Surveys

survey-clipart-1

When an opportunity is received at DMG Delta we offer you a free site survey, carried out by one of our highly qualified and knowledgeable members of staff.

The site survey is part of our opportunity process that we feel is beneficial not only to us, but also to you!

When attending site our member of staff will record down full details of all assets on site, they take a full overview of the plant room and note any causes for concern.

A standard site survey will take between 1-2 hours dependent on the size of the building and the complexity of the plant on site, this also gives us the perfect opportunity to meet with the client direct and any on site staff e.g. Porters.

Once we have undertaken the site survey we can then compile an accurate and detailed proposed maintenance program for that site. If we feel that there are any projects works required, for example – boiler replacements then we can also issue you with a quote for these works.

Our aim at DMG Delta is to prolong the life of your assets on site, and we believe that providing you with a bespoke planned maintenance program is the first step in achieving this goal.

For further details, or to arrange your free site survey then please contact us on the following telephone number – 01279 810100.

Boiler maintenance to suit your needs

With the recent spate of cold weather and heavy snowfall across the country, one of the highest priorities for our clients is the need for a fully functioning boiler to ensure fully functioning hot water and heating services. Thats where DMG Delta can help to provide a detailed heating and boiler plant maintenance contract

(more…)